A green full-face helmet resting on an OMW Cavalry electric skateboard beside a country path

Buying an OMW Electric Skateboard: What Else Do You Need?

Plan your first OMW purchase: check the included charger and tools, prepare protective gear, and choose the essentials for pneumatic or MAD wheels.
OMW Electric Skateboard Losing Range? What to Check First Reading Buying an OMW Electric Skateboard: What Else Do You Need? 6 minutes

Start with a properly fitted helmet and protective pads. For pneumatic wheels, add a compatible pump and pressure gauge. Your OMW complete board includes a charger, remote and basic tools, so you can put your initial budget toward riding equipment rather than duplicate accessories.

Your starter shopping list

  • Prepare before riding: a helmet designed for skateboarding, wrist guards, knee pads and elbow pads, plus secure, closed-toe shoes with a flat, grippy sole.
  • Add for pneumatic wheels: a pump with a head that reaches your wheel's valve, and a readable pressure gauge. One pump with a suitable built-in gauge can cover both jobs.
  • Check your delivery first: charger, remote, remote charging cable, basic tools and handle hardware.
  • Buy later if needed: a second wheel setup, replacement belts, spare tires or tubes, and a carrying bag.

In this guide: What's already included · Protective gear · Wheel-specific preparation · What can wait · When the box arrives · FAQ

What comes with an OMW complete board?

The standard Cavalry, Hussar, Lancer and Gladius complete-board packages include wheels, a remote and USB-C cable, a charger, basic tools, a manual and handle fittings. Charger specifications differ by model:

Model Included charger
Cavalry 50.4 V / 6 A
Hussar 50.4 V / 4.5 A
Lancer 58.8 V / 4 A
Gladius 58.8 V / 4 A

Included tools — all four models: a 3-in-1 hex key (2.5, 3 and 4 mm), a 3/8-inch combination wrench and a Y-tool. The Y-tool includes a 1/8-inch hex key and a Phillips screwdriver. Gladius uses its kicktail as a handle; the other three models include a separate handle. For a custom order, follow its agreed packing list.

Use the charger supplied for your board. A matching plug alone does not make another charger compatible.

Put protective gear ahead of upgrades

Choose a helmet intended for skateboarding and follow its manufacturer's fitting instructions. If you already own suitable protective gear in good condition, check its fit before buying replacements.

With the board switched off, try holding the remote while wearing your wrist guards. You should be able to grip it securely and reach the controls without the guard pressing the throttle. Resolve an awkward fit before riding.

Plan your first practice sessions in daylight. Protective gear and braking practice come before performance upgrades.

Pneumatic wheels and MAD wheels need different preparation

OMW Cavalry pneumatic wheel on the left and Lancer MAD polyurethane wheel on the right
Left: a pneumatic wheel on Cavalry. Right: a polyurethane MAD wheel on Lancer. Only the pneumatic tire needs inflation.

If your order has 150 mm or 175 mm pneumatic wheels

Prepare a pump and pressure gauge before the first ride. Test whether the pump head can reach the valve without forcing it against the wheel hub. A gauge is useful even when a tire looks inflated: appearance alone does not give you its pressure.

This applies to the stock 175 mm Cavalry and stock 150 mm Hussar setups, and to a Lancer ordered with a pneumatic-wheel option. Base your kit on the wheels you selected, rather than the model name alone.

Measure pressure with the tires cold. OMW's recommended starting pressures are 36 PSI for 7-inch (175 mm) tires and 30 PSI for 6-inch (150 mm) tires. For a short ride near home, you can check pressure before leaving and keep the pump there. For a longer outing, a portable pump and a return plan are useful; a pump cannot repair every puncture or cut.

If your order has MAD polyurethane wheels

MAD Wheelz V2 105 mm and MAD MAX 125 mm wheels are polyurethane and do not need inflation. Their openings are part of the wheel design, not inflatable chambers.

If you later change wheels to suit your route, use the OMW wheel fit and setup guide to identify the required drivetrain parts.

What can wait until you know your routine?

  • A second wheel set: buy it for a defined route or ride feel. If you already ordered a 2-in-1 package, account for both supplied setups first.
  • Spare belts: useful when downtime would interrupt regular riding, but order for the installed wheel-and-pulley setup. Follow the OMW belt size and replacement guide; the board's model name alone is not a complete belt specification.
  • Spare tires and tubes: relevant to pneumatic setups, not a MAD-only kit. Buy the matching parts when you need a repair kit for longer trips or regular use, rather than collecting several sizes.
  • A carrying bag: try lifting and carrying the board first. Then choose a bag that fits the complete board with its installed wheels and is rated for its weight.
  • Lighting accessories: plan these around your actual route and the selected board's fittings. Do not treat a remote-controlled lighting connector, or sealant for it, as proof that the optional front or RGB lights are included.

When the box arrives, check before ordering more

Lay out the contents beside your order confirmation and the model's packing list. Identify the supplied charger, remote cable and tools, and keep the manual and spare hardware together. Check the selected wheel package as well as any separately ordered accessories.

If an item appears missing, check the shipment information before buying a replacement. For selected 2-in-1 configurations, the skateboard may ship from a local warehouse while the additional wheel set ships separately from the factory. Delivery dates may therefore differ between the two packages. Check the shipping information for your selected model and configuration. Ask about the specific missing item with your order number and a photo of the received contents.

With your equipment ready, follow the first-seven-rides practice guide to begin learning.

FAQ

OMW Blog FAQ illustration with question-and-answer speech bubbles

Do I need to buy a charger and remote separately?

No. The standard Cavalry, Hussar, Lancer and Gladius complete-board packages include a charger and remote.

Do MAD wheels need a pump?

No. MAD Wheelz V2 105 mm and MAD MAX 125 mm do not inflate. A pump and gauge are for pneumatic tires.

Should I buy spare belts with my first board?

Consider a matching spare set if you rely on the board regularly and want less downtime. Order for your installed wheel-and-pulley setup.

What is the simplest starter kit?

Protective gear, secure shoes and the supplied board equipment. Add a compatible pump and gauge for pneumatic tires.

Leave a comment

All comments are moderated before being published.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.